Overview of finite elements simulation of temperature profile to estimate properties of materials 3D-printed by laser powder-bed fusion

Laser powder bed fusion(LPBF),like many other additive manufacturing techniques,offers flexibility in design expected to become a disruption to the manufacturing industry.The current cost of LPBF process does not favor a try-anderror way of research,which makes modelling and simulation a field of superior importance in that area of engineering.In this work,various methods used to overcome challenges in modeling at different levels of approximation of LPBF process are reviewed.Recent efforts made towards a reliable and computationally effective model to simulate LPBF process using finite element(FE)codes are presented.A combination of ray-tracing technique,the solution of the radiation transfer equation and absorption measurements has been used to establish an analytical equation,which gives a more accurate approximation of laser energy deposition in powder-substrate configuration.When this new analytical energy deposition model is used in in FE simulation,with other physics carefully set,it enables us to get reliable cooling curves and melt track morphology that agree well with experimental observations.The use of more computationally effective approximation,without explicit topological changes,allows to simulate wider geometries and longer scanning time leading to many applications in real engineering world.Different applications are herein presented including:prediction of printing quality through the simulated overlapping of consecutive melt tracks,simulation of LPBF of a mixture of materials and estimation of martensite inclusion in printed steel.     

Optimal spectral phase control of femtosecond laser-induced up-conversion luminescence in Sm^3+:NaYF4 glass

The spectral phase of the femtosecond laser field is an important parameter that affects the up-conversion(UC)luminescence efficiency of dopant lanthanide ions.In this work,we report an experi-mental study on controlling the UC lmiiinescence efficiency in Sm^3+:NaYF4 glass by 800-nm femtosec-ond laser pulse shaping using spectral phase modulation.The optimal phase control strategy efficiently enhances or suppresses the UC luminescence intensity.Based on the laser-power dependence of the UC luminescence intensity and its comparison with the luminescence spectrum under direct 266-nm fem-tosecond lciser irradiation,we propose herein an excitation model combining non-resonant two-photon absorption with resonance-media ted three-photon absorption to explain the experimental observations.     

基于等效介质原理的宽角超材料吸波体的理论分析

目前,很少有文章就如何实现宽角度吸波材料进行详细的理论分析和设计指导,设计宽角度吸波材料仍然是一件很困难的事情.本文基于等效介质理论对带有反射地板的单层介质超材料吸波体进行较为详细的理论分析.从基础电磁理论出发,推导TE波(横电波,电场方向与入射面垂直的平面电磁波)和TM波(横磁波,磁场方向与入射面垂直的平面电磁波)照射下吸波体的反射系数,分析实现宽角度吸波效果所需的等效电磁参数,为宽角度超材料吸波体的设计提供了理论基础.此外,论文还理论分析了实现宽带宽角吸波等效电磁参数所要满足的条件,并做了计算检验.结果表明,当介质等效电磁参数按照特殊曲线随频率发生变化时,理论上能实现宽带宽角的吸波效果.     

Adaptive vehicle posture and height synchronization control of active air suspension systems with multiple uncertainties

This paper addresses the tasks of height and posture motion control for an electronically controlled active air suspension (AAS) system. A mathematical model of a vehicle body with AAS system is established to describe the dynamic characteristics and then formulated into a multi-input multi-output nonlinear system by considering parametric uncertainties and unmodelled dynamics. Based on this mathematical model, a synchronization control strategy is proposed to adjust the heights of adjacent AASs simultaneously, driving the pitch and roll angles closely to an arbitrarily neighborhood of zero, achieving global uniform ultimate boundedness. The proposed controller is robust to parametric uncertainties and external disturbances. A projection operator is utilized to limit the estimated parameters to their corresponding prescribed bounds in finite time. A co-simulation is conducted by combining a virtual vehicle plant with ASS system in AMEsim with the proposed synchronization controller in MATLAB/Simulink. Simulation results demonstrate that the proposed synchronization controller is effective and robust.     

无轴承旋翼柔性梁载荷特性研究

应用Hamilton原理建立了双路传力的无轴承旋翼运动方程。采用均匀入流模型,基于直升机飞行平衡条件,建立了无轴承旋翼柔性梁载荷的计算模型,并通过算例验证了模型的精度。利用该模型,研究了全机重心位置、机身气动阻力以及平尾安装角对柔性梁载荷特性的影响,给出了各因素对柔性梁载荷的影响趋势,得出了降低柔性梁载荷的方法。数值结果表明:2cm左右重心位置的变化能够引起9%~11%的柔性梁载荷变化量,15%气动阻力的增加会导致约9%的柔性梁载荷的增大;2°平尾安装角的变化引起约10%柔性梁载荷的变化量,3°平尾安装角的变化引起约26%柔性梁载荷的变化。     

Multi-reference lens-less Fourier-transform holography with a Greek-ladder sieve array

Lens-less Fourier-transform holography has been actively studied because of its simple optical structure and its single-shot recording.However,a low-contrast interferogram between the reference and object waves limits its signal to noise ratio.Here,multi-reference lens-less Fourier-transform holography with a Greek-ladder sieve array is proposed in the experiment and demonstrated effectively to improve the signal to noise ratio.The key technique in our proposed method is a Greek-ladder sieve array,which acts as not only a wave-front modulator but also a beam splitter.With advantages of the common path,single shot,and no need for a lens,this system has enormous potential in imaging and especially in extreme ultraviolet and soft X-ray holography.     

Yolk‐Shell Porous Microspheres of Calcium Phosphate Prepared by Using Calcium L‐Lactate and Adenosine 5′‐Triphosphate Disodium Salt: Application in Protein/Drug Delivery

A facile and environmentally friendly approach has been developed to prepare yolk‐shell porous microspheres of calcium phosphate by using calcium L ‐lactate pentahydrate (CL) as the calcium source and adenosine 5′‐triphosphate disodium salt (ATP) as the phosphate source through the microwave‐assisted hydrothermal method. The effects of the concentration of CL, the microwave hydrothermal temperature, and the time on the morphology and crystal phase of the product are investigated. The possible formation mechanism of yolk‐shell porous microspheres of calcium phosphate is proposed. Hemoglobin from bovine red cells (Hb) and ibuprofen (IBU) are used to explore the application potential of yolk‐shell porous microspheres of calcium phosphate in protein/drug loading and delivery. The experimental results indicate that the as‐prepared yolk‐shell porous microspheres of calcium phosphate have relatively high protein/drug loading capacity, sustained protein/drug release, favorable pH‐responsive release behavior, and a high biocompatibility in the cytotoxicity test. Therefore, the yolk‐shell porous microspheres of calcium phosphate have promising applications in various biomedical fields such as protein/drug delivery.     

Synthesis of poly(n‐butyl acrylate) homopolymer and poly(styrene‐b‐n‐butyl acrylate‐b‐styrene) triblock copolymer via AGET emulsion ATRP using a cationic surfactant

Cationic emulsions of triblock copolymer particles comprising a poly(n‐butyl acrylate) (PⁿBA) central block and polystyrene (PS) outer blocks were synthesized by activator generated by electron transfer (AGET) atom transfer radical polymerization (ATRP). Difunctional ATRP initiator, ethylene bis(2‐bromoisobutyrate) (EBBiB), was used as initiator to synthesize the ABA type poly(styrene‐b‐n‐butyl acrylate‐b‐styrene) (PS‐PⁿBA‐PS) triblock copolymer. The effects of ligand and cationic surfactant on polymerizations were also discussed. Gel permeation chromatography (GPC) was used to characterize the molecular weight (M_n) and molecular weight distribution (MWD) of the resultant triblock copolymers. Particle size and particle size distribution of resulted latexes were characterized by dynamic light scattering (DLS). The resultant latexes showed good colloidal stability with average particle size around 100–300 nm in diameter. Glass transition temperature (T_g) of copolymers was studied by differential scanning calorimetry (DSC). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 611–620